UAB „Metbela“ started its activities in Kaunas, in 2014. The main company’s activity is buying of ferrous scrap from the enterprises purchasing and handling waste metal. The company buys ferrous scrap in bulk shipments, already arranged according to positions and loaded on freight wagons. This scrap metal is exported to Belarus.
The primary purpose of the enterprise is to buy only qualitative scrap metal meeting all relevant requirements and standards.
Guarantee of the company’s success is its responsible attitude towards customers, environmental issues and effective business management.
Due to the ongoing efforts of the company’s managers and employees, UAB “Metbela” is seeking continuous improvement of its shipments quality, to improve the customer service standards. The company is striving to meet the needs of modern market and to satisfy the market demand in time. UAB „Metbela“ seeks to develop long-term and mutually beneficial cooperation.
AŠR
2A; 2AC
11A/AP-1
3A;3AC
AŠR
Shredded scrap
METBELA
AŠR
AŠR steel scrap and waste according to GOST 2787. Allowable content of galvanized scrap with impurities in mass: lead (Pb) – not more than 0,01%, tin (Sn) – not more than 0,35%, zinc (Zn) – not more than 5,5%; chromium (Cr) – not more than 0,05%; nickel (Ni) – not more than 0,04%; copper (Cu) – not more than 0,075%.
2A; 2AC
GOST 2787; STB 2026
METBELA
2A; 2AC
Metal thickness - not more than 2 mm, linear dimensions - not more than 700 mm, allowable linear dimensions of separate pieces (not more than 10% in the mass) – up to 1500 mm. Allowable not flattened and not cut according to formation pipes with the diameter of up to 300 mm, and the wall thickness – not more than 2 mm, not more than 10% in the mass. Contamination with non-hazardous impurities - not more than 1,0% in mass.
11A/AP-1
11A/AP-1 TU BY 400074854.038
METBELA
11A/AP-1
Scrap and waste of automotive sheet metal intended for stamping of bodies and sheets in the automotive plants.
3A;3AC
GOST 2787
METBELA
3A;3AC
Metal thickness - not more than 4 mm. Linear dimensions - not more than 1500 mm. Allowable not flattened and not cut according to formation pipes with the diameter of up to 300 mm, and the wall thickness – not more than 4 mm. Contamination with non-hazardous impurities - not more than 1,5% in mass.
Other types of scrap metals
1A-4/ŽD-2
TU BY 400074854.038
1A; 4A
GOST 2787/ STB 2026
5A/ŽD-2
TU BY 400074854.038
11A
GOST 2787/ TU BY 400074854.038/ STB 2026
9A
GOST 2787
5A; 6A; 8A; 10A; 12A
GOST 2787/ STB 2026
8A/AP-1; 9A/AP-1
TU BY 400074854.038
Relevant legal acts
The Order No. D1-207 of the Minister of Environment of the Republic of Lithuania of 27 April 2004 “Regarding the approval of the procedures concerning transboundary shipments of waste”
